Non-Ferrous Scrap – Ferrous Scrap Non – Ferrous Metal Alloys prices on Commodity Evolution

Commodity Evolution, with specific algorithms associated with independent market research and surveys (we also use open and big data – we process it by producing information with robust statistical and machine learning methods), provides prices of more than 437 types of ferrous and non-ferrous scrap, non-ferrous metal alloys, classified in Italy and international areas.

Commodity Evolution is an organization that monitors global industrial markets and collects data independently and impartially. Commodity Evolution’s experience and relationships with industry participants enable it to gather market and price information on commodity products.

Commodity Evolution uses data from both actual transactions and the supply and demand balance and takes into account several factors that contribute to the price of each specific transaction (quality, size, volume, delivery terms). The data is presented in a transparent manner, protecting the privacy of data provided by major global market companies.

Commodity Evolution provides advanced, specific and dedicated reporting on key industry markets. From commodity prices, charts, historical data, statistical indicators and industry information to risk management and consulting.

Among the main categories of scrap you will be able to find:

Italian Ferrous Scrap

Price No per fornace /Fornace Cutting Shear / Fornace Cutting blowtorch / Fornace Scrap Stainless Steel

RF – 1st Category – Scrap Mechanical Cast Iron
RF – 2nd Category – Scrap Of Cast Iron Common Tubes/Radiators
RF – Auto Body Stripped
RF – Bundles Of Deep Stamping Sheet Metal 30×30 Cm, Excluding Galvanized/Stamped/Varnished Sheet Metal
RF – Car Bodywork With Mechanics
RF – Cast iron for refining
RF – Cast Iron Hematite
RF – Cast Iron In Balls For Spheroidal
RF – Complete Car Bodywork With Engine
RF – From Cast Iron Turnings For Remelting In Steel Mills
RF – From End-of-Life Electric Motors and/or End-of-Life Electric Generators
RF – From High Speed Steels For Recovery
RF – From Industrial/Railway/Navy Demolition Min 6 Mm Thickness
RF – From Leachings/Moleches/Slags From Lav. Steelmaking Of Stainless Steel Aisi 400 On Metal Yield Base
RF – From Light New Mixed, Min 2.9 Mm Thickness
RF – From Long/Mixed/Non-Paltable Steel Turnings
RF – From Mixed Metals From Vehicle Crushing
RF – From New Workshop Falls Min 5 Mm Thick, Straight
RF – From No Liquids Engines And Transmission Components From Vehicles With Aluminum Components
RF – From Steel Turnings From Automatic Machines
RF – From Tungsten Carbide Hard Metal Turnings For Recovery
RF – From Turnings No Alloys/Slags Heating Slags/Other Materials From Chemical Industries
RF – From Turnings Of Cast Iron For Chemical Uses And For Special Concrete Additives
RF – From Turnings Of High Speed Steels From Tooling
RF – From Turnings Of Steel In Alloys Containing 20% Nickel
RF – From Vehicle Wrecks No Hazardous Liquids/Components/No Metal For Recovery
RF – Heavy Harvesting Min 3 Mm E.g. Vehicle Demolition/Bonded Steel Pieces/Mechanical Cast Iron
RF – Iron – Cans
RF – Iron – Demolition
RF – Iron – Harvesting
RF – Iron – Heavy Sheared
RF – Iron – Loose Cans
RF – Iron – Mixed Turning
RF – Iron – Palatable Sheet Metal
RF – Iron – Pantograph
RF – Iron – Roughing
RF – Iron – Sheet Metal
RF – Iron – Turning
RF – Light New Mixed Max 2.9 Mm From Wash. Chromed Band Ex. Metallic Packaging
RF – Light New Mixed Max 2.9 Mm From Wash. Galvanized Sheet Metal
RF – Light New Mixed Max 2.9 Mm From Wash. Tinplate Ex. Metal Packaging
RF – New From Lav. And From Old Scrap From Demolition/Aisi 430, No Alloys/Non-Ferrous Metals/Colecules And Slags
RF – New From Machining For Recovery
RF – New From Wash. And From Old Scrap From Demolition/Aisi 410, No Alloys/Non-Ferrous Metals/Colatims And Slags
RF – New Sheet Metal, Loose, Up To 2.9 Mm Thickness – for cast iron and steel foundry
RF – Of Common Cast Iron E.g. Pipes, Radiators
RF – Of Mechanical Cast Iron For Recovery
RF – Of New, Loose Sheet Metal, Max 2.9 Mm Thickness
RF – Old Collecting Max 2.9 Mm E.g. From Separate Collection, Inert Exempt
RF – Old From Demolition No Alloys/Non-Ferrous Metals/Colecules And From Slags
RF – Qualified Iron and/or Corrective Steel For Cubicles
RF – Scrap Automatic Turnings Cat. 45 – E5m
RF – Scrap Demolition Cat. 01 – E3
RF – Scrap Galvanized Sheet Metal Cat. 50z – E8z
RF – Scrap New Falls Cat. 02 – E3
RF – Scrap Proler Cat. 33 – E40
RF – Scrap Sheet Metal Cat. 50 – E8
RF – Scrap Sheet Metal Parcels Cat. 52 – E6
RF – Scrap Stainless Steel – Aisi 304 – Turnings
RF – Scrap Stainless Steel – Aisi 316 – From Scrap Newly Wrought
RF – Scrap Stainless Steel – Aisi 430 – From Scrap Newly Wrought
RF – Scrap Turnings Cat. 41 – E5m
RF – Stainless Steel Scrap – Aisi 304 – From New Machining Scrap
RF – Unqualified Of Iron And/or Steel, By Cubicle
RF- From Castings/Molings/Rollings From Steel Working Dept. Siderurgical Steel Turnings From Stainless Steel Aisi 300 On Metal Yield Base

Italian Non Ferrous Scrap

Raw – Aluminum – 99.5 lamination plates 1050A UNI EN 487
Raw – Aluminum – 99.70 ingots EN AB-10700 UNI EN 576
Raw – Aluminum – Al Si11 Cu2 Fe Zn1,4 remelting blocks EN AB 46100 UNI EN 1676
Raw – Aluminum – Al Si12 Cu1 Fe remelting blocks EN AB 47100 UNI EN 1676
Raw – Aluminum – Al Si6 Cu4 remelting blocks EN AB 45000 UNI EN 1676
Raw – Aluminum – Al Si9 Cu3 Fe remelting blocks EN AB 46000 UNI EN 1676
Raw – Aluminum – AlMg3 remelting ingots EN AB 51100 UNI EN 1676
Raw – Aluminum – AlMgSi extrusion billets 6060 UNI EN 486
Raw – Aluminum – AlSi10MnMgb remelting ingots EN AB 43500 UNI EN 1676
Raw – Aluminum – AlSi12b remelting ingots EN AB 44100 UNI EN 1676
Raw – Aluminum – AlSi12CuMgNi remelting ingots EN AB 48000 UNI EN 1676
Raw – Aluminum – AlSi7Mg 0.3 EN AB 42100 UNI EN 1676
Raw – Antimony – Sb 99.6 UNI 3270 ruler
Raw – Bismuth – Bi 99.99
Raw – Brass – Cu Zn 35 Mn 2 Al 1 Fe 1 CB765S ingots UNI EN 1982
Raw – Brass – Cu Zn 35 Pb2 Al B CB752S ADZ ingots UNI EN 1982
Raw – Brass – Cu Zn 37 Pb 2 Ni 1 Al Fe CB753S ingots UNI EN 1982
Raw – Brass – Cu Zn38 Al CB767S ingots UNI EN 1982
Raw – Brass – Cu Zn39 Pb1 Al CB754S ingots UNI EN 1982
Raw – Bronze – Cu Al 10 Fe2 CB331G ingots UNI EN 1982
Raw – Bronze – Cu Al11 Fe6 Ni6 CB334G ingots UNI EN 1982
Raw – Bronze – Cu Sn 12 CB483K ingots UNI EN 1982
Raw – Bronze – Cu Sn 5 Zn 5 Pb 5 CB491K ingots UNI EN 1982
Raw – Cadmium – Cd 99.95 UNI 3816 rods
Raw – Chrome – Cr 99.5
Raw – Copper – Grade A Cu – CATH1 – UNI EN 1978
Raw – Gold – Au 99.99 gr
Raw – Lead – Pb 99.99 ingots UNI EN 12659
Raw – Magnesium – GD-Mg Al 8.5 Zn Mn loaves ex UNI 6169
Raw – Magnesium – MgP 99.9 breads ex UNI 5537
Raw – Manganese – Mn 99.9 electrolytic
Raw – Nickel – Ni 99.8 cathodes, briquettes, UNI 3353 drops
Raw – Palladium – Pd 99.9 gr
Raw – Platinum – Pt 99.9 gr
Raw – Silicon – Si 98 UNI 3038
Raw – Silver – Ag 99.99 kg
Raw – Tin – MB 83 anti-friction UNI 4515 ingots
Raw – Tin – Pb Sn 50 for soft soldering and UNI 10368 coatings
Raw – Tin – Sn 99.9 ingots UNI EN 610
Raw – Zinc – Zn 98.5 ingots UNI EN 1179
Raw – Zinc – Zn 99.99 ingots UNI EN 1179
Raw – Zinc – Zn Al 4 Cu 1 ingots UNI EN 1774
Raw – Zinc – Zn Al 4 ingots UNI EN 1774
Scrap – Aluminum – a single alloy for plastic processing UNI EN 13920-4
Scrap – Aluminum – beverage cans UNI EN 13920-10
Scrap – Aluminum – Car rims
Scrap – Aluminum – chips of a single alloy UNI EN 13920-12
Scrap – Aluminum – de-lighting of used packaging UNI EN 13920-15
Scrap – Aluminum – from incineration yield 75
Scrap – Aluminum – from radiators UNI EN 13920-11
Scrap – Aluminum – from separation of crushed non-ferrous residues UNI EN 13920-9
Scrap – Aluminum – non-ferrous from crushing for separation UNI EN 13920-8
Scrap – Aluminum – packaging UNI EN 13920-14
Scrap – Aluminum – skimmings, leachate and grains UNI EN 13920-16
Scrap – Aluminum – two or more alloys for plastic processing UNI EN 13920-6
Scrap – Aluminum – two or more alloys UNI EN 13920-13 shavings
Scrap – Aluminum – two or more plastic processing alloys of the same UNI EN 13920-5 series
Scrap – Aluminum – unalloyed UNI EN 13920-2
Scrap – Aluminum – UNI EN 13920-7 castings
Scrap – Aluminum – wire and cables UNI EN 13920-3
Scrap – Brass – clean cases UNI EN 12861-S-CuZn-2
Scrap – Brass – clean cases UNI EN 12861-S-CuZn-3
Scrap – Brass – from lead bars UNI EN 12861-S-CuZn-4-A
Scrap – Brass – from lead bars UNI EN 12861-S-CuZn-4-B
Scrap – Brass – lead turnings UNI EN 12861-S-CuZn-5-A
Scrap – Brass – lead turnings UNI EN 12861-S-CuZn-5-B
Scrap – Brass – mixed valves / taps UNI EN 12861-S-CuZn-6
Scrap – Brass – production waste UNI EN 12861-S-CuZn-1-A Cu 63.5
Scrap – Brass – production waste UNI EN 12861-S-CuZn-1-B Cu 62
Scrap – Brass – production waste UNI EN 12861-S-CuZn-1-C Cu 59.5
Scrap – Brass – skimmings, grains and leaky
Scrap – Brass – various 95 m / m UNI EN 12861-S-CuZn-7
Scrap – Bronze – 1st cat. Aluminum UNI 10597-1
Scrap – Bronze – 2nd cat aluminum. UNI 10597-2
Scrap – Bronze – impure UNI 10596-1
Scrap – Bronze – industrial UNI 10596-2
Scrap – Bronze – lead UNI 10596-3
Scrap – Bronze – mechanical pieces and turnings UNI 10596-4
Scrap – Bronze – skimmings, grains and leaky
Scrap – Bronze – tin rail UNI EN 12861-S-Cu Sn8
Scrap – Bronze – Valves size and turnings UNI 10596-5
Scrap – Copper – electrolytic produced according to UNI EN 12861-S-Cu-1
Scrap – Copper – electrolytic recovery UNI EN 12861-S-Cu-2
Scrap – Copper – from enameled wire UNI EN 12861-S-Cu-3
Scrap – Copper – from prod. of pipes, tapes, etc. UNI EN 12861-S-Cu-4
Scrap – Copper – from recovery of pipes, strips, etc. 98.0 m / m UNI EN 12861-S-Cu-7
Scrap – Copper – from recovery of pipes, strips, etc. UNI EN 12861-S-Cu-5
Scrap – Copper – from recovery of Scrap -s and burnt wires 96 m / m UNI EN 12861-S-Cu-8
Scrap – Copper – from Scrap – recovery and burnt wire 98.5 m / m UNI EN 12861-S-Cu-6
Scrap – Copper – from wire, sheet recovery, 92.0 m / m UNI EN 12861-S-Cu-9
Scrap – Copper – granulate 98.5 UNI EN 12861-S-Cu-10-C
Scrap – Copper – granulate 99.8 UNI EN 12861-S-Cu-10-B
Scrap – Copper – granulate 99.9 UNI EN 12861-S-Cu-10-A
Scrap – Copper – pieces of coated cable with Cu content from 30 to 70
Scrap – Copper – skimmings, leaky and flakes
Scrap – Gold – Scrap And Waste From Processing Gold And Alloys
Scrap – Lead – lead sheaths for cables ex UNI 10434-3
Scrap – Lead – leaky, foams, oxides and ashes ex UNI 10434-5
Scrap – Lead – mixed alloys ex UNI 10434-4
Scrap – Lead – not alloy ex UNI 10434-1
Scrap – Nickel – ALPA UNI 9980 nickel silver
Scrap – Nickel – anodes and cathodes UNI EN 12861
Scrap – Nickel – cupronickel UNI EN 12861-S-Cu Ni10 Fe1 Mn
Scrap – Nickel – UNI EN 12861
Scrap – Palladium – Scrap And Waste From Processing Palladium And Alloys
Scrap – Platinum – Scrap And Waste From Processing Platinum And Alloys
Scrap – Silver – Scrap And Waste From Silver And Alloy Processing
Scrap – Tin – anti-friction alloys UNI 10432-4
Scrap – Tin – leaky, foams, oxides and ashes UNI 10432-6
Scrap – Tin – mixed alloys UNI 10432-5
Scrap – Tin – not alloy UNI 10432-1
Scrap – Tin – pewter UNI 10432-3
Scrap – Tin – UNI 10432-2 welding alloys
Scrap – Zinc – foundry alloys UNI EN 14290 A.1.2
Scrap – Zinc – leaky, foams and ashes UNI 14290 B.2
Scrap – Zinc – mixed alloys from crushed castings UNI EN 14290 A.2.4
Scrap – Zinc – mixed alloys UNI EN 14290 A.2.2
Scrap – Zinc – not in alloy UNI EN 14290 A.1.1, A.2.1
Scrap – Zinc – zinc matte from hot dip galvanizing UNI EN 14290 B.1
Scrap – Zinc – zinc powder from zinc plating UNI EN 14290 A.1.5
Semi-finished – Aluminum – Al 99.5 EN AW 1050A UNI EN 573-3 and UNI EN 1301-2 wire
Semi-finished – Aluminum – sheet Al 99.5 EN AW 1050A UNI EN 573-3
Semi-finished – Aluminum – standard bar AlMgSi EN AW 6060 UNI EN 573-3 UNI EN 755-2 state T5, f mm 20
Semi-finished – Aluminum – standard bar AlSiMgMn EN AW 6082 UNI EN 573-3 UNI EN 755-2 state T6, f mm 20
Semi-finished – Aluminum – tape for capsules, base 0,20-0,23 Al 99,0 EN AW 1200 UNI EN 573-3, 485-2
Semi-finished – Aluminum – tape for containers, base 0.07 Al 99.0 UNI EN 576
Semi-finished – Aluminum – thin laminate, base 0.007 Al 99.5 UNI EN 576
Semi-finished – Aluminum – thin laminate, base 0.02 Al 99.5 UNI EN 576
Semi-finished – Brass – bar for turning CW 614 N UNI EN 12164
Semi-finished – Brass – Cu Zn 37 UNI EN 12166 wire
Semi-finished – Brass – hard OT 63 tube, CW508L UNI EN 12449, rods, mm 35×1
Semi-finished – Brass – terracotta OT 67 plate, CW506L UNI EN 1652, mm 2000x1000x0.8
Semi-finished – Copper – Cu-ETP wire, cooked, on coils, f 0.50 UNI EN 13602
Semi-finished – Copper – UNI EN 1057 – R220 – 12 x 1.0 tube
Semi-finished – Copper – UNI EN 1172 tape – CW 024 A – R 240 – 0,6×1000
Semi-finished – Copper – UNI EN 1652-CW 024A-H 090-1.5x1000x2000 sheet
Semi-finished – Lead – Pb 99.95 sheets UNI 3165
Semi-finished – Lead – Tubes of Pb 99.95 UNI 3165
Semi-finished – Zinc – Zn 99.95 sheet UNI EN 1179

International Ferrous Scrap

Busheling Ferrous Scrap – Midwest USA
Cast Iron FOB Black Sea – Russia
Commodity Evolution International Ferrous Scrap Index
E1 Shredded Steel – Germany
Export Ferrous Scrap Shredded FOB – UK
Ferrous Scrap GOST A3 2787-75 FOB – Romania
LME Steel Scrap CFR – India
LME Steel Scrap CFR – Taiwan
LME Steel Scrap TSI HMS 80:20 CFR – Turkey
Nickel Pig iron – Nickel content 1.5% – 1.7% – China
Shredded Ferrous Scrap CFR ISRI 211 – Bangladesh
Shredded Ferrous Scrap ISRI 211 CFR – India
Steel Scrap HMS 4-6mm EXW – Shandong – China
Steel Scrap HMS 8mm min EXW – Wuxi – China
Steel Scrap HMS I DDU – Poland
Steel Scrap HMS I/II 60:40 FOB – Europe
Steel Scrap HMS I/II 80:20 – Europe
Steel Scrap HMS I/II 80:20 – Turkey
Steel Scrap HMS I/II 80:20 – UK
Steel Scrap HMS I/II 80:20 CFR – Taiwan
Steel Scrap HMS I/II 80:20 CFR – Vietnam
Steel Scrap MMS 4-6mm EXW – Guangzhou – China
Steel Scrap MMS 4-6mm EXW – Tianjin – China
Steel Scrap MMS 6-10mm EXW – Liaoning – China
Steel Scrap Process Scrap Delivered – China

International Non Ferrous Scrap

Al Extrusion – China
Al Extrusion – Guangdong – China
Al Extrusion – Henan – China
Al Extrusion – Shanghai – China
Al Extrusion – Tianjin – China
Al Extrusion – Zhejiang – China
Al Off-cuts – China
Al Plate/sheet – China
Al Radiator – China
Al/Cu 56% Radiator – South China
Al/cu Radiator – China
Al/cu Radiator- Copper 56% – East China
Aluminium Scrap Taint/Tabor CIF – Asia
Baled Ubc – Guangdong – China
Baled Ubc – Shanghai – China
Bare Bright Copper 97% Wire – China
Bare Bright Copper 99% – Shanghai – China
Bare Bright Copper 99% Wire – Hebei – China
Bare Bright Copper 99% Wire – Tianjin – China
Bare Bright Copper 99% Wire – Zhejiang – China
Brass – South USA
Brass – Tax Included – USA
Brass Copper 94%/96% – Tax Included – USA
Brass Radiator – China
Brass Scraps – Copper 62% – East China
Brass Scraps – Copper 62% – South China
Brass Scraps – Copper 65% – East China
Brass Scraps – Copper 65% – South China
Brass Scraps – Copper 68% – China
Brass Turning Copper 59% – Clean – China
Bright Copper 99% – Tax Included – China
Burnt Wire – Copper 94%-96% – East China
Burnt Wire – Copper 95%/97% – East China
Burnt Wire Copper 95%/96%- North China
Cable Nodule – Copper 99.9% – China
Clean Tense – North China
Copper 55% Wire – North China
Copper 94/96% – East China
Copper 94%/95% – South USA
Copper 97 % – North China
Copper 97% – Shanghai – China
Copper 97% – South China
Copper 97% – Zhejiang – China
Domestic Honey – China
Environment-friendly Tin Dross – China
Environment-friendly Tin Lump – China
Honey – Copper 60% – Europe
Honey – Copper 63% – Japan
Honey – Copper 65% – USA
Lead-containing Tin Dross – China
Lead-containing Tin Lump – China
Low-oxygen Copper 99.95% Rod – Hebei – China
Low-oxygen Copper Rod – Tianjin – China
Mixed – Copper 94%/96% – China
Mixed Copper 94%/95%- China
Motor Copper 91%/92% – China
Motor Copper 92%/93% – China
Motor Copper 92%/93%- Zhejiang – China
Motor Copper 92%/94%- North China
Pure Tin Lump – China
Scrap E-bicycle Battery – China
Scrap Ignition Battery Black Shell – China
Scrap Ignition Battery White Shell – China
Scrap Motor With Shell – China
Scrap Wire – Guangdong – China
Scrap Wire – Henan – China
Scrap Wire – Shanghai – China
Scrap Wire – Tianjin – China
Scrap Wire – Zhejiang – China
Scrap-litho – Guangdong – China
Shredded Taint – China
Shredded Tense – China
Silver-containing Tin Lump – China
Skimmings – Shanghai – China
Spray Coating – China
Tense – Central China
Tense – East China
Tense – North China
Tense – North China
Tense – Recycling Rate 85%-88% – China
Tense – Southeast China
Tense – Southwest China – China
Tense – USA
Tense – Without Iron, Recycling Rate 92%-95% – China
Thick Cable Baled – China
Zorba – Metal recycling rate 96% – Copper 3% – USA

Catalytic Converters

J010 – Toyota – Yaris 1.0
1358184080 1349899080 C983 – Fiat – Ducato/PSA Jumper/Boxer
33010 – Toyota – Verso 1.4 D4D/Yaris 1.4 D4D
46433199 – Fiat – Punto/Lancia Y 1.1 – 1.2 – Fiat – Punto/Lancia Y 1.1 – 1.2
46523256 – Fiat – 2001-03 – Fiat – 2001-03
46523259 – Fiat – Seicento 0.9 – Fiat – Seicento 0.9
46523259 4652359 – Alfa Romeo-Fiat-Lancia – 9A-A595/C387
46524758 46473014 – Fiat-Lancia – Brava Marea 1.2 – 1.6/Delta II 1.6
46531832 – Fiat – Punto 1.2 – Fiat – Punto1.2
46531832 46534354 – Fiat – Punto 1.1 – 1.2 – Fiat – Punto 1.1 – 1.2
46531832 46763161 – Fiat – Punto/Lancia Y 1.1 – 1.2 – Fiat – Punto/Lancia Y 1.1 – 1.2
46531942 – Alfa Romeo–Lancia – C387 – Alfa Romeo–Lancia – C387
46534352 46531832 – Fiat – Punto1.1 – 1.2 – Fiat – Punto 1.1 – 1.2
46542849 – Fiat – Punto II 1.2/Lancia Ypsilon – Fiat – Punto II 1.2/Lancia Ypsilon
46542850 – Fiat – Punto II 1.2/Fiat Bravo 1.2 16v – Fiat – Punto II 1.2/Fiat Bravo 1.2 16v
46557519 – Fiat – Multipla 1.9 JTD – Fiat – Multipla 1.9 JTD
46756799 – Fiat – Punto II 1.9 JTD
46764186 – Fiat – Seicento 1.1
46792618 – Fiat-Lancia – Multipla/Stilo/Lybra 1.9 Jtd
46792618 46817544 – Fiat-Lancia – Multipla/Stilo/Lybra 1.9 JTD
46794000/1 46794000 – Fiat – Stilo1.9JTD/147 1.9 JTD
46794000/1 55185920 – Fiat-Alfa Romeo – Multipla 1.9 JTD/Stilo 1.9 JTD/147 1.9 JTD/156 1.9 JTD
46794000/1 55185975 – Fiat – Stilo 1.9 JTD/147 1.9 JTD
46801816 46756799 – Fiat – Strada 1.9 JTD
46816697 – Fiat – Panda 1.1 – 1.2-Seicento 1.1 40kw/54hp
51824930 – Fiat-Lancia – Fiorino 1.4-Musa 350R 1.4
51824930 51929835 – Alfa Romeo-Fiat-Lancia
51838592 55216690 – Alfa Romeo-Fiat-Lancia
51872190 51824930 – Alfa Romeo-Fiat-Lancia
51875637 55216690 – Fiat-Lancia – SX4DD Sedici 2.0/159 2.0 JTDM
55181852 – Opel – Combo 1.3 TD/Corsa C 1.3 CDTi 51kw
55193509 55181852 – Lancia – Ypsilon 1.3
55194797 55181852 – Alfa Romeo-Fiat-Lancia
55202601 55181852 – Opel-Fiat – Combo C 1.3 CDTI/Doblo Cargo 1.3 JDI
55203842 55181852 – Opel – Combo 1.3 TD
55203848 55181852 – Opel – Corsa D 1.3 CDTI
55204193 55181852 – Opel – Corsa D 1.3 CDTI 66kw/90hp
55214895 55181852 – Opel-Fiorino – Combo 1.3 CDTi/Corsa 1.3 CDTI/Fiorino 1.3 JTD
55216690 1370425080 – Fiat-Alfa Romeo – SX4 Sedici 2.0/Ducato 2.0/159 2.0 JTDM
8200566701 H8200395477 – Renault – Laguna/Clio/MeganeIII/Qashqai1.5DCI
90573212 / 90573852 – Opel-Vauxhall – Astra/Vectra B Hatchback 1.6 i 16V 101hp
96484267 – Daewoo – Daewoo/Chevrolet Matiz 0.8
C 186 – Renault – Twingo/Clio MK2 1.2 16V 55kw/75hp
C 221 – Renault – Clio II/Kubistar 1.2
C 53 – Renault – Clio II 1.2 43kw/58hp/Kangoo 1.4
C02 – Toyota – Carina
GM 26 – Opel-Vauxhall – Corsa B 1.0
GM 41 – Opel-Vauxhall – Corsa C 1.0
GM 45 – F7 – Opel-Vauxhall – Astra 1.6/Corsa C 1.4
GM 45 – Opel-Vauxhall – Astra 1.6/Corsa C 1.4
GM 45 GN – Opel-Vauxhall – Vectra 1.8
GM 45 GP – Opel-Vauxhall – Astra 1.6/Corsa C 1.4
GM 76 – Opel-Vauxhall – Agila/Corsa/Astra 1.2 – 1.4
KT 0223 – Smart – A1614900321
KT 1160 – Mercedes Benz – A1694900214/Mercedes W169 A180
T11 – Toyota – Corolla/Auris/Yaris 1.0
T12 – Toyota – Yaris Verso 1.3
TR PSA K179 – Citroen-Peugeot – C2 206 1.1/C3 68hp/50kw/Saxo 1.2
TR PSA K181 – Citroen-Peugeot – C2 1.6/XSARA/206 Cabrio/307/1007
TR PSA K208 – Citroen-Peugeot – 206/C 2 1.4/C3/Berlingo MF 1.4I
TR PSA K276 – Citroen-Suzuki – C3 1.4 HDI/Liana 1.4 DDiS
W2BEF5 – Hyundai-Kia – IX20/i301.4/Venga

Non Ferrous Metal Alloys

Al-Alloy AlSi9Cu3 Aluminum-Silicon
Alloys for electronics / 60Sn40Pb Tin-Lead
Alloys for electronics / 63Sn37Pb Tin-Lead
Alpacca CuZn20Ni20 Copper-Zinc
Aluminum Alloy – A380 Aluminium
Aluminum Alloy – ADC12 – South Asia Aluminium
Aluminum Alloy – ADC12 – West Asia Aluminium
Aluminum Alloy – Zero liquid discharge – ZLD102 Aluminium
Aluminum Alloy – Zero liquid discharge – ZLD104 Aluminium
Aluminum Alloy-A356 Aluminium
Aluminum Alloys – die casting alloy – ADC12 Aluminium
Aluminum Bars 2007 Aluminum-Copper
Aluminum Bars 2011 Aluminum-Copper
Aluminum Bars 2014 Aluminum-Copper
Aluminum Bars 2014A Aluminum-Copper
Aluminum Bars 2017A Aluminum-Copper
Aluminum Bars 2024 Aluminum-Copper
Aluminum Bars 2030 Aluminum-Copper
Aluminum Bars 2033 Lead Free Aluminum-Copper
Aluminum Bars 6026 Aluminum-Silicon
Aluminum Bars 6026 Lead Free Aluminum-Silicon
Aluminum Bars 6061 Aluminum-Magnesium
Aluminum Bars 6064A Aluminum-Magnesium
Aluminum Bars 6082 Aluminum-Silicon
Aluminum Bars 6262 Aluminum-Magnesium
Aluminum Bars 6262A Aluminum-Magnesium
Brass Bar – C3604 Aluminium
Brass Bar – CW617N Aluminium
Brass Bar – HPb58-3A Aluminium
Brass Bar – HPb59-1 Aluminium
Copper-Arsenic Alloy Copper-Arsenic
Copper-Beryllium Alloy Copper-Beryllium
Copper-Phosphorus Alloy Copper-Phosphorus
Cuprallumini CuAl10 – Hot workable Copper-Aluminum
Cuprallumini CuAl8- Cold workable – tubes, sheets and wires Copper-Aluminum
Cupronickel – C70600 – CW352H Copper-Nickel
Cupronickel – C71500 – C71640 Copper-Nickel
Ergal – Alloy 7020 Aluminum-Zinc
Ergal – Alloy 7049 Aluminum-Zinc
Ergal – Alloy 7050 Aluminum-Zinc
Ergal – Alloy 7075 Aluminum-Zinc
Foundry brass / G-CuZn40 Copper-Zinc
Foundry brass /G-CuZn36 Copper-Zinc
Foundry Bronze / G-CuSn10Zn2 Copper-Tin
Foundry bronze / G-CuSn12 Copper-Tin
Group 2000 – Duralumin – AA2024 Aluminum-Copper
International code – EN 1670 Tin-Zinc
Nimonic 263 Nickel-Chrome
Nimonic 80A Nickel-Chrome
Solder Bar – 60A Copper-Lead
Solder Bar – 63A Copper-Lead
Special brass – CuZn39Pb3 Copper-Zinc
Special brass – CuZn40Pb2 Copper-Zinc
Special bronze / G-CuSn10Pb20 Copper-Tin
Special bronze / G-CuSn10Zn2 Copper-Tin
Special bronze / G-CuSn8Pb15 Copper-Tin
Tin solder – No lead Tin-Copper
Tin-base Bearing Alloy Tin
Zamak 3 – Zinc min 92.29%-Aluminium min 3.9% Zinc-Aluminium
Zamak 5 – Zinc 95% – Aluminium 4% – copper 0.9%

Try our web platform for free. Find out how it can help and simplify your business. Free Trial